EN14800 GAS HOSES

The fitting functions as a gas valve, so it is not necessary to use another gas valve, as is the case with hoses with threaded fittings. Connections The gas hose with type 657 connection handle must be used to connect the gas hose with type 657 fitting. The other side of the gas hose always has a threaded (threaded) end. The thermal fuse fitting includes as standard the integrated safety fuse type, which automatically switches off the gas supply with an activation temperature of 100 °C. It prevents the gas from burning or exploding in case of fire. Once the fuses are activated, they must be replaced in full.

Designed for installation in public housing for the supply of gas to domestic cooking appliances. It consists of a flexible stainless steel hose with unlimited service life, equipped with an integrated automatic shut-off valve and a stopper with rubber connection. The ROAI and the Flexible Hose are free to rotate relative to each other. The ROAI valve is equipped with a flap that automatically cuts off the gas passage in the event of a cut or tear in the hose. After solving the problem, a simple closure of the tap is sufficient to reset it. The hose on which the ROAI valve and valve are mounted has NF approval.

In some device groups, the connection areas for standard nut or nipple connection are not suitable for the minimum bending diameter. In this case, excessive bending of the product is prevented by using 90 degree bent elbow connection and more comfortable, long-lasting use is ensured.